XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Remove the rubber grommet from the floor and place it to one side. It will not be reused.
-
Take three screws, nuts and cable harness from the kit and insert the cable harness together with the rubber grommet into the hole in the body.
-
Install the connector on the bracket and tighten.
Note! Install the rubber grommet so that the cable points to the left on the inside.
-
Adjust the cable length from the connector and to the rubber grommet.
-
Press the rubber grommet into place.