XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Clamp the cable harness at the radiated heat shield's left bracket using a cable tie from the kit. Install the clip in such a way that the cable harness
comes out from the sharp edge of the bracket.
-
If necessary, adjust the length of the cable harness between the clips and rubber grommet.
-
Disconnect the secondary lock on the cable harness connector by carefully prying the catch down and moving the catch forwards.
-
Connect the cable harness' blue (BL) loose cable to one of the connector's positions 2, 6 or 8 depending on the function required:
2 = Charging
6 = Reversing lamp
8 = Rear fog lamp
Position - Cable - Function
-
1 - Green (GN) - Right-hand indicator lamp
-
2 - Blue (BL) - Charging
-
3 - Red (R) - Left-hand brake lamp
-
6 - Blue (BL)- Reversing lamp
-
7 - Red (R) - Right-hand brake lamp
-
8 - Blue (BL) - Fog lamps
-
10 - Yellow (Y) - Left-hand indicator lamp
