XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Carefully pull away the protective tape and successively push down into place, first the outer, then the inner tape. Make sure that the rubber
moulding is not in the way.
Note! Do not push down the strip too close to the protective tape on the inner tape. Then the strip is almost up against the sill and can catch,
causing the tape to break.
-
Press the trim strip down firmly with a pressure of approximately 2 kg/cm2 along its entire length.
-
Remove the tape markings.
-
Take the rubber plugs from the kit and drill a - 4mm (5/32") hole in the middle on them.