XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
Headlamp Control Module: Scan Tool Testing and Procedures
Description Of Parameters
Description of parameters
Parameters, status
Rear position sensor calibration status, status
Indicates calibration status of the rear position sensor.
Calibrated= position sensor is calibrated.
Uncalibrated= position sensor is not calibrated.
Front position sensor calibration status, status
Indicates calibration status of the front position sensor.
Calibrated= position sensor is calibrated.
Uncalibrated= position sensor is not calibrated.
Parameters, value
Power supply, value
Measurement range 6 - 20 V.
Indicates the power supply to the headlamp control module (HCM).
The normal value when the alternator is charging: 13.0-14.5 V.
Steering wheel angle, value
Measurement range: -780 to +780°.
Indicates current steering wheel angle.
The normal value when the steering wheel and front wheels point straight ahead is approx. 0°.
Front position sensor, value
Measurement range: 0 to +5 V.
Indicates sensor signal for front position sensor.
The normal value when the vehicle is on a flat surface and is unladen is approx. +2.5 V.
Rear position sensor, value
Measurement range: 0 to +5 V.
Indicates sensor signal for rear position sensor.
The normal value when the vehicle is on a flat surface and is unladen is approx. +2.5 V.
Description Of Reading Off Extended Diagnostic Trouble Code (DTC) Information
Description of reading off extended diagnostic trouble code (DTC) information
Description of frozen values See: Description Of Frozen Values, HCM
Description of status identifier See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Vehicle Communication Information, Engine Control Module (ECM)/Description of Status Identifier
Description of counter See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Vehicle
Communication Information, Engine Control Module (ECM)/Description of Counter
Description Of Frozen Values, HCM
Description of frozen values
Explanation
Frozen values are parameter values that are stored when a diagnostic trouble code is generated. Not all parameters can be read out for all diagnostic