XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
Impact Sensor: Service and Repair
Collision Sensor, B-Pillar
Collision sensor, B-pillar
Operation number: 88452-2
Note! Some variation in the illustrations may occur, but the essential information is always correct.
Removal
Note! Removal steps in this procedure may contain installation details.
Disconnect the battery ground cable. See: Starting and Charging/Battery/Service and Repair/Procedures/Battery Disconnecting and Connecting.
Remove the panel. Refer to: B-pillar trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/B-Pillar Trim Panel.
Torque: Impact sensor to body, 6 Nm
Installation
To install, reverse the removal procedure.