volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Battery Cable To the Starter Motor Control Solenoid.|Page 7715 > < Changes Introduced Up to April 2009 Inclusive|Page 7709
Page 1
background image

Battery Cable: Service and Repair
Battery Cable To the Starter Motor Control Solenoid.

Battery cable to the starter motor control solenoid.

Operation number: 37213-2

Removal

Note! Removal steps in this procedure may contain installation details.

Perform battery disconnecting and connecting See: Service and Repair/Procedures/Battery Disconnecting and Connecting

Remove the following items:

-

air cleaner (ACL) housing Refer to: Air cleaner housing, B6324S, TF-80SC AWD, B6324S, TF-80SC See: Engine, Cooling and
Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing 

-

the intake manifold Refer to: Induction pipe, B6324S See: Powertrain Management/Fuel Delivery and Air Induction/Intake Air Plenum/Service
and Repair 

1. Torque: Battery lead to battery lead terminal, 14 Nm

2. Torque: Starter motor B+ terminal, 15 Nm

3. Torque: Generator B+ terminal, 15 Nm

Battery Cable To the Starter Motor Control Solenoid.|Page 7715 > < Changes Introduced Up to April 2009 Inclusive|Page 7709