XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
For all cars with RTI
-
Remove the two screws (1) in the DVD drive bracket and remove the bracket with DVD drive.
-
Position the two red/white (R/W) wires back along the cable. Insulate and fasten them at the cable using foam tape from the kit. They must not
come into contact with the chassis. The two green connectors should be loose.
Connection to the DVD unit
-
Unplug the DVD power supply connector (1).
-
Plug in the connector of the iPod adapter power supply into the DVD unit (2).
-
Plug in the connector unplugged from the DVD unit into the other connector of the iPod adapter (3).
-
Connect the Melbus cable (4), P/N 8633596, to the DVD unit.
-
Reposition the bracket with DVD drive and fasten it with the three screws.
-
Reposition the protective cover/foam rubber insulation over the DVD drive. Make sure that the cable does not chafe against sharp edges.
-
Clamp in the cable at the existing cable harnesses using three tie straps from the kit.
