XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
-
Angle the dashboard environment panel outwards so that it is possible to insert a couple of fingers between the centre console and the side of the
dashboard environment panel
-
Detach the dashboard environment panel by pulling it downwards while maintaining the same angle. Some force is required because the panel is
tightly installed. Disconnect the connectors on the reverse of the dashboard environment panel. Place the dashboard environment panel to one side.
Note! If any of the outer hooks break off, these must be repaired. The method for this can be found in the Workshop Manual in the section
about the dashboard.
Illustration B applies to cars from model year 2005- (CH 425000-)
-
Remove the bracket with dashboard environment panel from the centre console: Pull the lower edge out and downwards until it releases from the
mounting at the upper edge. Then fold backwards.
Note! Do not damage the removed components and surrounding panels.
If necessary, remove the panel around the gear selector lever to gain more space. The panel is secured by four catches on the under side at the boot
-
Disconnect the connectors from the radio and dashboard environment panel. Also disconnect the connector from the phone keypad if applicable.
Place the unit to one side.
Applies to cars up to and including model year -2004 (CH -424999)
