volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cable Harness for the Radio (Accessory Electronic Module)|Page 12266 > < Cable Harness for the Radio (Accessory Electronic Module)|Page 12264
Page 29
background image

-

Connect the routed red/white (R/W) cable in position 8 in the connector.

-

Reinstall the connector in the holder and reinstall the whole unit in the fuse holder.

-

Take the bracket, Jukebox, M4 screws, plate washers, plastic sleeves, plastic washers and M4 nuts from the kit.

-

Install the Jukebox in the bracket and tighten as illustrated.

-

Take the adapter cable from the kit and connect in the corresponding socket in the rear edge of the Jukebox.

Note! Make sure that the cable on the smaller connector is on the top inside the larger connector to the jukebox as illustrated.

Cable Harness for the Radio (Accessory Electronic Module)|Page 12266 > < Cable Harness for the Radio (Accessory Electronic Module)|Page 12264