XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
-
Position the sub-frame on a lifting table
-
Carefully lift the subframe
-
Locate the control arms on the ball joints and the steering gear on its mountings
-
Remove the hook (999 5045) that is holding the steering gear
-
Lift the sub-frame up completely
-
Reinstall the engine block heater (if applicable).
-
Install the engine block heater (if applicable) on the left front mounting for the sub-frame
-
Install the four screws in the sub-frame together with the subframe brackets. Use new screws. Lubricate the screws
-
First tighten the screws on the left side of the sub-frame. Tighten to 105 Nm. Angle tighten to 120 degree. Then tighten the righthand side to the
same value
-
Finally tighten the screws for the brackets on both sides to 50 Nm.
Finishing
Install
