XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Install the anti-roll bar in the rear axle member. Use an M12 screw.
Use new lock nuts.
Note: Ensure that the cable for the parking brake passes below the ends of the anti-roll bar. Press the cables into place in the clamps on the heat
deflector plate.
Installing the control arm and tie rod
Install:
-
the control arms using new screws. Finger tighten
-
the tie rod. Use new lock nuts. Finger tighten.
Installing the position sensor (Four-C only)
Install the position sensors.
Installing the torque arm and anti-roll bar links
