volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Coolant Level Sensor > < Cooling System|Capacity Specifications|Page 3225
Page 1
background image

Coolant: Service and Repair

Cooling system - draining, charging and bleeding

Operation number: 26012-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Note! Removal steps in this procedure may contain installation details.

Removal

Warning! Read the health and safety instructions for the cooling system.  Refer to: Safety information Cooling system .

Warning! When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth.

Coolant must only be mixed with water of the correct quality.  Refer to: Water quality See: Description and Operation 

Installation

To install, reverse the removal procedure

Charge the cooling system. 951 2957 Coolant Reservoir See: Tools and Equipment/951 2957 Coolant Reservoir  together with 951 2953 Cover See:
Tools and Equipment/951 2953 Cover.

Warm up until the thermostat opens. Top off as necessary.

Coolant Level Sensor > < Cooling System|Capacity Specifications|Page 3225