XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Loosen the pipes and position them out of the way.
Pull out the heat exchanger.
Installation
Installing heat exchanger
Note! Always use new O rings.
Install the heat exchanger carefully.
Screw the heat exchanger into place.
Install the upper pipes.
Install the lock bracket using round-nosed pliers.
Press in the pipes using a screwdriver and the lock catch using pliers.
Install the lower pipes.
Install the lock bracket using round-nosed pliers.
Press in the pipe using a screwdriver and the lock bracket using round-nosed pliers
Install the strip clamp for the pipes.
Install the seal and the plate.
Install the heater hoses in the engine compartment.
Installing the Steering column / Steering shaft