XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Connecting Rod: Specifications
Summary Of Specific Components And Tightening Torques
NOTE: Screws coated with locking fluid or sealant must be replaced with new when reinstalled.
Always use new screws and nuts when angle tightening. Any exceptions to this rule will be indicated in the method.
Angle-tightening in tight spaces.
Connecting rod cap (connecting rod with treated toothed surface between the connecting rod and cap, screw with waist)
Stage 1............................................................................................................................................................................................................................20 Nm
Stage 2.................................................................................................................................................................................................angle-tighten 90 degree
Connecting rod cap (connecting rod with fracture surface between the connecting rod and cap, fully threaded screw)
Stage 1............................................................................................................................................................................................................................30 Nm
Stage 2.................................................................................................................................................................................................angle-tighten 90 degree
