XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
-
Connect the cable from the front engine block heater socket to the socket (3) on the junction connector.
-
Press the locking sleeves (from the kit) over the cable splices. The larger locking sleeve must be on the socket (3).
Note! Check that the cables do not chafe against sharp edges or moving parts in the engine compartment.
Tighten the branch connector to the bracket.
-
Reinstall the engine splash guard and torque tighten the screws to 24 Nm (18 lbf.ft.).
Installing the passenger compartment connector socket
-
Partially fold the carpet back over the bracket.
-
Make a hole in the carpet opposite the upper mounting hole in the bracket using a double ended scriber.
-
Take a screw and the passenger compartment connector socket from the kit. Tighten the passenger compartment connector socket to the bracket in
the upper mounting.
-
Insert the double ended scriber into the lower mounting for the passenger compartment connector socket. Make a hole in the carpet opposite the
lower hole on the bracket.
-
Tighten the lower mounting for the passenger compartment connector socket using a screw from the kit.
-
Press a locking sleeve (from the kit) onto the passenger compartment connector socket. Slide the locking sleeve as far along the terminal for the
