volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Front Crankshaft Seal > < Cylinder Head Gasket|Service and Repair|Page 2990
Page 17
background image

-

the plastic nuts for the hatch in the right fender liner

-

the right front wheel. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.

Lower the car.
Tighten the pipe screw for the turbocharger (TC) oil pressure pipe. See Tightening torque See: Specifications/Mechanical Specifications/Tightening
Torque.

Install:

-

the ground strips between the cylinder head and the firewall

-

the engine stabilizer brace between the suspension turrets Clamp the servo hose at the right-hand engine stabilizer brace mounting

-

the negative battery lead. First read  Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.

Check

Replace the oil and oil filter if necessary.

Check:

-

the engine oil level

-

the servo oil level

-

the coolant level.

Warm up the engine until the thermostat opens.
Check the engine for leaks.
Top up the coolant if necessary.

Front Crankshaft Seal > < Cylinder Head Gasket|Service and Repair|Page 2990