XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Brake Bleeding: Service and Repair
Brake System, Bleeding (Using Bleeding Unit)
Brake system, bleeding (using bleeding unit)
Note! Bleeding an ABS brake system takes longer than bleeding a normal brake system.
Guidelines for bleeding
When reconditioning or replacing brake calipers bleed the relevant brake pipe as follows.
The brake pedal must be depressed throughout the operation. This is so that the brake system is not drained of brake fluid.
If the braking system has been completely or partly drained, bleed the whole system. A bleeding unit that can pressurize the brake system to 0.2-0.3 Mpa
must be used.
Note! Use only Volvo Genuine Parts brake fluid (Volvo DOT 4+). Never reuse brake fluid. Always keep brake fluid well sealed in its original
packaging.
Preparations
Switch off the ignition.
Clean around the brake fluid reservoir filler cap.
Take out the special brake fluid collection bottle.
Connect the bleeding unit
