XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Check that the control module connector is intact.
Installing the control module
-
Press the control module into place so that the catch on the rear engages
-
Position the connector. Carefully press the connector down.
NOTE: The pins are fragile. Check that the connector goes straight down into the control module.
-
Tighten the screw for the connector
-
Check that the connector cover is correctly positioned. Remedy if necessary
-
Install the relays and shunts.
-
Install the relay box.
-
Install the soundproofing panel on the driver's side.
Finishing
-
Program in the data read off from the old control module (customer-programmed data for example). This is carried out via VADIS/VIDA vehicle
communication
