volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Pipe Receiver Drier, Replacing|Page 2185 > < Pipe Receiver Drier, Replacing|Page 2183
Page 1
background image

Hose/Line HVAC: Service and Repair
Pipe/Hose, Compressor, Replacing

Pipe/hose, compressor, replacing

Pipe/hose, compressor, replacing

Before starting work on the compressor or magnetic clutch compressor

Warning! Follow the safety instructions for work on air conditioning (A/C) systems. See 

Note! First read the instructions covering slow and quick leaks. See Oil in the A/C system See: Fluids/Refrigerant Oil/Service and Repair 

Note! Always plug the pipes and couplings when working on the climate control system.

Removal

-

Disconnect the battery negative lead. See Battery, replacing See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Battery, Replacing 

-

Drain the refrigerant from the system. 

Remove

-

the air pipe at the control module box

-

the hose clamp and charge air pipe / hose on the right-hand side (turbocharged engines only). If necessary, use a hot air gun to make removal
easier.

Pipe Receiver Drier, Replacing|Page 2185 > < Pipe Receiver Drier, Replacing|Page 2183