volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Accessory Electronic Module (AEM)|Page 3936 > < Accessory Electronic Module (AEM)|Page 3934
Page 5
background image

-

Press in the catch on the grey connector on the rear of the fuse holder in the cargo compartment, turn the lock arm up as far as it will go and pull
out the connector.

-

Carefully prise apart the sides of the connector holder in the ends so that the connector can pass by the retaining hooks.

-

Pull out the connector.

Note! Make a note of the position number of the connector. These are located on the ends of the connector and in the bottom of the fuse holder.

-

Connect the green (GN) cable to position 19 in the connector. Connect the white (W) cable to position 30.

-

Reinstall the connector in the holder

-

Reinstall the connector in the fuse holder.

-

Refit the Rear Electronic Module (REM).

Accessory Electronic Module (AEM)|Page 3936 > < Accessory Electronic Module (AEM)|Page 3934