XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Note! Check that the control module's connectors are intact.
Installing the driver door module (DDM)
Install the upper panel.
Position the control module in the hole on the door panel.
Check that the lower mounting for the control module is correctly located in the support on the door panel.
Press the control module into place.
Install:
-
the connectors
-
the nut and screw
-
the door panel, see Replacing the front door side panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
and Repair/Removal and Replacement/Front Door Side Panel.
Ordering software
Order software for the driver door module (DDM) according to the table below.
Finishing
Initialise the window position in the communication input.
