volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 4859 > < Procedures|Page 4857
Page 5
background image

Remove:

-

snap ring (1)

-

washer (2), spring (3) and plunger (4).

Inspect and clean all parts.
Blow out aluminum housing.
Oil parts with engine oil.
Reassemble solenoid.
Check operation as described in operations 1 and 2.
Reinstall solenoid in car using new seal.

Testing

Erase diagnostic trouble codes.
Test-drive car.
Check that no new diagnostic trouble codes are displayed.
If new codes are displayed, continue troubleshooting as per VIDA.

Procedures|Page 4859 > < Procedures|Page 4857