volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Fuel Gauge Sender > < Fuel System - Fuel Filler Neck Loose at Grommet
Page 2
background image

Install Oetiker clamp PN 988101 at the fuel filler door grommet as per instruction below.

^

Engine must be off.

^

Remove fuel filler cap (engine off).

^

Use Oetiker clamp PN 988101

^

Slide clamp over the filler neck and rubber.

^

Position the rubber against the rolled

^

flange of the steel filler pipe.

^

Position the clamp slot at 08.00 o'clock.

^

Tighten the clamp using an Oetiker Pincer with

^

Side jaws PN 14100083 or Volvo tool PN 9512619. Re-install fuel filler cap.

Warranty Information

Fuel Gauge Sender > < Fuel System - Fuel Filler Neck Loose at Grommet