volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 72 > < Reading and Clearing Diagnostic Trouble Codes|Page 70
Page 3
background image

 ohms
The ohmmeter should read approximately 0.

OK - Fault Found

Not OK - contact resistance and oxidation

-------------------------------------------------

Checking for open-circuits, contact resistance and oxidation

Check ground terminal 31/84 and the wiring connected to it. Check for an open-circuit according to Checking wiring and terminals. Permanent fault See:
Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and Terminals/Checking Wiring and Terminals. Permanent Fault.
Check for contact resistance and oxidation according to Checking wiring and terminals. Permanent fault See: Testing and Inspection/Component Tests
and General Diagnostics/Checking Wiring and Terminals/Checking Wiring and Terminals. Permanent Fault.

Reading and Clearing Diagnostic Trouble Codes|Page 72 > < Reading and Clearing Diagnostic Trouble Codes|Page 70