XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Traction Control Module: Service and Repair
Replacing ABS / DSTC (Dynamic Stability and Traction Control) Control Module
Replacing ABS / DSTC (dynamic stability and traction control) control module
Preparation
Removing the battery lead
Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Preparations for replacement
Note! There is no need to download software when replacing the ABS control module.
Removing the air cleaner (ACL) housing
Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Brake Pipe
Master Cylinder / ABS Unit, Replacing.
Removing the integrated relay / fusebox. Remove the connector for the ABS unit
Brake pipe from hydraulic unit / front wheel / junction, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and
Repair/Brake Pipe From Hydraulic Unit / Front Wheel / Junction, Replacing.
Removal
Removing the control module
Remove:
-
the pump motor connector
-
the four screws. Use a 6 mm torx external socket.
Carefully lower the control module.
Checking the control module
