volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 821 > < Reading and Clearing Diagnostic Trouble Codes|Page 819
Page 3
background image

Checking the windshield washing

Checking components

Activate the windshield washer using the windshield wiper switch. Read off the status.

Hint: If the read-out of the status of the wiper switch gave a correct result, the problem is not in the Steering wheel module (SWM).

Was the status of the wiper switch OK?

Yes - No Fault Found

No -  Replacing a component 

-------------------------------------------------

Replacing a component

Replace the wiper switch.

Other information

-

Washer / wiper switch, replacing See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Wiper Switch/Service and Repair 

Select continue when the defect has been remedied. 

Continue -  Checking components 

-------------------------------------------------

Checking components

Activate the washer using the windshield wiper switch. Read off the status.

Hint: If the windshield wiper switch status is OK, the fault is in the windshield wiper switch.

Was the status of the wiper switch OK?

Yes - Fault Found

No -  Replacing a component 

-------------------------------------------------

Replacing a component

Try replacing the steering wheel module (SWM).

Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.

Other information

Reading and Clearing Diagnostic Trouble Codes|Page 821 > < Reading and Clearing Diagnostic Trouble Codes|Page 819