volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 959 > < Reading and Clearing Diagnostic Trouble Codes|Page 957
Page 44
background image

Checking the error message

Trouble-shooting information

Note! Many serious error messages cannot be erased from the display window. This remains in the display window until the error concerned
has been dealt with.

Does the error message indicate a serious error?

Yes - Fault Found

No - No Fault Found

-------------------------------------------------

Trouble-Shooting Information

Trouble-shooting information

Condition

-

No SWM diagnostic trouble codes are displayed in the CEM

-

No diagnostic trouble codes are displayed in the SWM.

Possible source

-

Defective indicator switch

-

Defective control unit.

Fault symptom[s]

-

Parking heater does not work.

Checking the Read and Reset Button on the Indicator Switch

Checking the read and reset button on the indicator switch

Checking the components

Activate the read and reset button on the indicator switch and read status.

Hint: If read-out of status on read and reset button gave a correct result the fault is not in the SWM.

Did read-out of status on read and reset button give a correct result?

Yes - No Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component

Replace the indicator switch.

Additional information:

-

To replace indicator switch see Turn signal switch, replacing See: Lighting and Horns/Sensors and Switches - Lighting and Horns/Turn Signal
Switch/Service and Repair/Turn Signal Switch, Replacing.

Press Continue when fault has been repaired.

Reading and Clearing Diagnostic Trouble Codes|Page 959 > < Reading and Clearing Diagnostic Trouble Codes|Page 957