volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Keypad Unit, Steering Wheel, Replacing|Page 1257 > < Keypad Unit, Steering Wheel, Replacing|Page 1255
Page 5
background image

-

the three screws (3). Lift out the horn (4).

Applies to cars with pre-routed wiring

-

Press in the catch (1) on the connector for the right dummy button

-

Remove the connector from the dummy button.

-

Remove the screw (1) in the dummy button on the right hand side of the horn

-

Press in the catch (2). At the same time pull the dummy button from its socket. Place to one side. If there is pre-routed wiring, continue to
procedure  Steering wheel mounted remote control for the radio See: Accessories and Optional Equipment/Steering Mounted Controls
Communication Module/Service and Repair/Steering Wheel Mounted Remote Control for the Radio.

Note! If there is no pre-routed connector the horn must be replaced. A new one is in the kit. Carry out procedures  Steering wheel mounted
remote control for the radio See: Accessories and Optional Equipment/Steering Mounted Controls Communication Module/Service and
Repair/Steering Wheel Mounted Remote Control for the Radio  and  Steering wheel mounted remote control for the radio See: Accessories and
Optional Equipment/Steering Mounted Controls Communication Module/Service and Repair/Steering Wheel Mounted Remote Control for the
Radio.

-

Remove the screw (1) in the dummy button on the left hand side of the horn

Keypad Unit, Steering Wheel, Replacing|Page 1257 > < Keypad Unit, Steering Wheel, Replacing|Page 1255