volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Lateral Accelerometer|Service and Repair|Page 1306 > < Braking Sensor/Switch|Specifications|Page 1302
Page 1
background image

Lateral Accelerometer: Service and Repair

Replacing the yaw rate sensor (1) and the lateral acceleration sensor in the center console (DSTC)

Removal

Yaw rate sensor

The yaw rate sensor (1) and the lateral acceleration sensor is positioned on a bracket under the parking brake lever. The yaw rate sensor is positioned
under the right front seat.

Note! These sensors must be handled with extreme care. If one of the sensors is dropped, it must be replaced.

Replacing the yaw rate sensor (1) / lateral acceleration sensor

-

Lift the cover off the center console locker

-

Remove the panel (use a small screwdriver).

The bracket for the yaw rate sensor (1) / lateral acceleration sensor

-

Remove the 2 screws.

-

Mark up a cable and the corresponding sensor (the connectors are not interchangeable).

-

Remove the connectors.

-

Lift up the bracket past the parking brake cables

The sensors (yaw rate sensor (1) / lateral acceleration sensor)

Lateral Accelerometer|Service and Repair|Page 1306 > < Braking Sensor/Switch|Specifications|Page 1302