XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Oil Level Sensor: Testing and Inspection
Oil level sensor, diagnostics
General
The engine control module (ECM) can diagnose the oil level sensor. A diagnostic trouble code (DTC) will be stored if an internal fault is detected in the
oil level sensor or if there is an open-circuit or a short-circuit to ground or voltage in its wiring connectors. A diagnostic trouble code (DTC) will also be
stored if the oil level is too low or high or if the oil level drops rapidly over a certain time (leakage).
The pulse ratio of all the oil level sensor pulses in a pulse train must be within the normal operating range of 17-83 %. If this is exceeded, a diagnostic
trouble code (DTC) will be stored in the engine control module (ECM).
Hint: Extremely diluted engine oil can result in a diagnostic trouble code (DTC) for the oil level being stored in the engine control module (ECM).
For further information about diagnostic trouble codes (DTCs), see Information, diagnostic trouble codes (DTCs) in VIDA.
