Reverse Light Contact Check for Backup Lamp Switch
-
To access/replace the central electronic module (CEM), see Central electronic module (CEM), replacing See: Body and Frame/Body Control
Systems/Body Control Module/Service and Repair/Central Electronic Module (CEM), Replacing.
-
For information on signals and additional values, see Signal specification See: Body and Frame/Body Control Systems/Testing and
Inspection/Pinout Values and Diagnostic Parameters.
-
To connect the test box, see Connecting the breakout box See: Body and Frame/Body Control Systems/Testing and Inspection/Pinout Values and
Diagnostic Parameters/Connecting the Breakout Box/Connecting the Breakout Box, Central Electronic Module (CEM).
Continue - Fault Found
-------------------------------------------------
