XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Installation
Installing limiter
Install:
-
the new limiter
-
the tie rod. Use thread sealant 116 1053. For tightening see specifications.
Remove counterhold 999 7020 and socket 999 7083.
Clean the steering rack after removing the tools. Check the steering rack for damage.
Installing the boot
Check that the boot is undamaged. Use a new boot if in any doubt. Ensure that the tape is in place on the threads. Install the boot using new clamps.
Remove the tape.
Installing the outer steering arm
Install:
-
the outer steering arm. Ensure that the markings and the measurements more or less correspond
-
the steering arm on the wheel spindle. Use a counterhold and tighten. For tightening torques, see specification.
