XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Use hydraulic hole cylinder 951 2923, locating pin 999 7031 and mounting bracket 999 7030 together with connecting rod 999 7039.
Press off the wheel spindle.
Remove the wheel spindle from the upper control arm.
Removing the sub-frame
Position a lifting table under the sub-frame.
Remove:
-
the four sub-frame mountings
-
the sub-frame brackets screws
-
the brake hose mounting stays from mountings on the brackets
-
the brake pipes from the plastic clips on the brackets.
Note: Remove the fuel filter bracket on the right bracket.
Carefully lower the sub-frame.
Remove the three hoses on the EVAP canister.
Lower the sub-frame fully.
Removing components from the sub-frame
