XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
-
the mountings for the parking brake cable in the sub-frame. Use M8 screws
-
the exhaust system.
Tighten:
-
the 2 M12 screws for the lower control arm
-
the link at the inner mounting on the control arm on the subframe. Use an M12
-
the 2 M12 screws for the tie rod.
Install the lateral link against the wheel spindle. Hand-tighten the screw.
Tighten the 2 M12 screws for the lateral link.
Remove the mobile jack.
Install the spring struts on the control arms. Use a larger jimmy bar to bend the control arm down and to align the spring strut against the control arm.
Tighten the M12 screw.
Press the cable sleeve guide sleeve into place in the mounting.
Install:
-
the expander on the cable. Press the mounting together to lock the cable in the expander
-
the expander between the brake shoes
-
the return spring.
