XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Install
-
Adjust the position of the wheel spindle/ spring strut, see Wheel knuckle / spring strut, calibrating See: Front Steering Knuckle/Service and Repair.
Tighten to 105 Nm. Angle-tighten 90°. Use bevel protractor 951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel
Protractor.
-
the anti-roll bar link to the spring strut. Use a new nut. Tighten to 50 Nm. Counterhold with a Torx wrench so that the boot is not damaged.
-
The ABS sensor cable.
-
ABS sensor onto the wheel spindle. Tighten the ABS sensor. Tighten to 10 Nm.
Note! Make sure that the sensor seat in the wheel spindle is absolutely clean. Clean the ABS-sensor with a soft brush.