XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Press the suspension up to its normal position, see Normal position See: Service and Repair/Procedures.
Install:
-
the mountings for the parking brake cable in the sub-frame. Use M8 screws.
-
the exhaust system according to Exhaust system, replacing See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair.
Tighten:
-
the 2 x M12 screws for the lower control arm
-
the link at the inner mounting on the control arm on the sub-frame. Use M12 screw
-
the 2 x M12 screws for the tie rod.
Install the lateral link against the wheel spindle. Hand-tighten the screw.
Tighten the 2 x M12 screws for the lateral link.
Remove the mobile jack.
Install the spring struts on the control arms. Use a larger jimmy bar to bend the control arm down and to align the spring strut against the control arm.
Tighten the M12 screw.