XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Viscous Coupling: Service and Repair
Active On Demand Coupling (AOC), Replacing
Active on Demand Coupling (AOC), replacing
Note: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.
Removal
Removing the exhaust system and the propeller shaft
Remove the exhaust system and the propeller shaft.
Removing the Active on Demand Coupling
Disconnect the connector from the wiring.
Position a container underneath the Active on Demand Coupling (AOC)/final drive. Remove the screws for the Active on Demand Coupling. Pull the
coupling straight out of the final drive housing.
Installation
Preparations for installing the Active on Demand Coupling
Clean the final drive housing. There must not be any lint from any paper or cloths.
Check that the mating surface is undamaged.