XC70 AWD L6-3.0L Turbo VIN 99 B6304T2 (2010)
PRODUCT MODIFICATION:
In order to minimize the wind noise the rear subframe will be updated with a new rubber plug after the chassis range in the header.
SERVICE:
Follow the procedure in the attachment.
VOLVO SERVICE TIME GUIDE (VSTG) INFO:
Operation number 98213-2 - Wind noise from rear subframe adjust acc to TJ 22476 - 0.4 hrs
- Claims may be submitted under the new car warranty when there is a documented customer complaint using claim type: 01
- Labor times are valid at the time of release and are subject to change.
1.
Note!
Some variation in the illustrations may occur but the essential information is always correct
2. Lift the vehicle on a hoist.
3. Clean any dirt from two drainage holes.
4. Cut the plugs as shown here. The dashed area should be removed.
5. Install one rubber plug in each of the holes mentioned in step 3.
6. Test drive to verify repair.
Technical Service Bulletin # TJ22476
Date: 100325
Body/Frame - Rear Subframe Wind Noise
