XC70 AWD L6-3.2L VIN 98 B6324S (2009)
-
Take cable harness (A) from the kit. Connect the fiber-optic cable's connectors between those disconnected from the car's cable harness.
Note! Fiber-optic cables may not be bent with a radius less than 25 mm (1").
-
Connect the two other connectors between the large connectors that were disconnected.
Applies to left-hand drive cars
-
Insert the long fiber-optic cable (1) in front of the air duct and across the center console.
-
Position the large loose connectors (2) and the excess of the fiber-optic cables (3) as illustrated.
Note! Fiber-optic cables may not be bent with a radius less than 25 mm (1").
-
Fold back the carpet.