XC70 AWD L6-3.2L VIN 98 B6324S (2009)
-
Connect the cable harness' blue (BL) loose cable to one of the connector's positions 2, 6 or 8 depending on the function required:
-
2 = Charging
-
6 = Reversing lamp
-
8 = Rear fog lamp
Position - Cable - Function
-
1 - Green (GN) - Right-hand indicator lamp
-
2 - Blue (BL) - Charging
-
3 - Red (R) - Left-hand brake lamp
-
6 - Blue (BL)- Reversing lamp
-
7 - Red (R) - Right-hand brake lamp
-
8 - Blue (BL) - Fog lamps
-
10 - Yellow (Y) - Left-hand indicator lamp
-
12 - Brown (BN) - Running lamps
-
Press the secondary catch into the connector.
-
Fold the insulation on the left-hand side at the front of the cargo compartment to one side.
-
Route the cable from the rubber lead-in and along the existing cable harnesses up to the trailer module (TRM) at the front edge of the left-had side
