XC70 AWD L6-3.2L VIN 98 B6324S (2009)
-
Align the front end of the rail carefully and make marks for the two front holes using a scriber.
-
Remove the rail.
NOTE: Make sure not to drill through the bracket that lies directly against the side panel's rear side.
-
Take a Dia. 6 mm (15/64 ") drill bit and install a drill stop of 3 mm (1/8 ").
-
Drill four holes through the side panel.
-
Remove any swarf.
-
Clean the marked surfaces using a mild, not etching, cleaning agent and wipe dry.
