volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Control Assembly, HVAC > < Compressor Clutch|Specifications|Page 13209
Page 1
background image

Condenser HVAC: Service and Repair

Condenser

Operation number: 87408-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal and Installation

Remove the cooling fan.  Refer to: Engine cooling fan (FC) See: Engine, Cooling and Exhaust/Cooling System/Radiator Cooling Fan/Service and Repair
 Engine cooling fan (FC), B6304T2 See: Engine, Cooling and Exhaust/Cooling System/Radiator Cooling Fan/Service and Repair 

Vehicles with a charge air cooler.
Remove the charge air cooler.  Refer to: Charge air cooler, B6304T2  

Change and lubricate the O-rings with compressor oil.

Vacuum-pump the AC-system.  Refer to: Vacuum pumping See: Service and Repair/Vacuum Pumping 
Fill the air conditioning system with refrigerant.  Refer to: Refrigerant, filling See: Service and Repair/Refrigerant, Filling 
Leak-trace the air conditioning system.  Refer to: Leak tracing, electronic leak tracer See: Testing and Inspection/Component Tests and General
Diagnostics/Leak Tracing, Electronic Leak Tracer 
Or: Refer to: Leak detection, tracer agent See: Testing and Inspection/Component Tests and General Diagnostics/Leak Detection, Tracer Agent 
Carry out a performance test on the climate control system.  Refer to: Climate control system, check See: Testing and Inspection/Component Tests and
General Diagnostics/Climate Control System, Check 

Control Assembly, HVAC > < Compressor Clutch|Specifications|Page 13209