XC70 AWD L6-3.2L VIN 98 B6324S (2009)
At the end of the manual is a list of components, where, with the help of the component designation, you can read off the name of the component, for
example, 3/2 = light switch.
List of type numbers
The list shows which type of component that respective type numbers refer to, for example, 3/x = switch, 6/x = electric motor, etc.
1
Battery
2
Relay
3
Switch
4
Control module
5
Driver information module
6
Electric motor
7
Sensor
8
Actuator
9
Heating element
10
Light
11
Fuse
15
Electrical distribution rail/box
16
Audio
17
Service/diagnostics
18
Contact reel
19
Meter
20
Ignition component/shunt
27
Optics
31
Ground connection
73
Branching point
74
Connector
B. Branching points
The wiring diagrams contain numbered branching points, for example 73/5035.
This information contains a section with a list of branching points. This list shows all the components that are connected to each branching point.
The location of the branching points is shown in the "Cable harness routing in vehicle" in Vehicle Level Harness Locations images.
C. Connectors
Connectors provide a bridge between two cable harnesses and are described in the "Connectors" Vehicle Level Connector views.
D. Electrical distribution
Operation of the fuses and relays is shown in the "Electrical distribution" in the Power and Ground Distribution diagrams.
E. Data communication
Today's cars contain CAN, LIN and MOST networks that transfer information. Connections to these networks are not shown in their entirety in the
respective wiring diagram. Complete information on CAN, LIN and MOST communication is found in "Control modules" in the Information Bus.
F. Abbreviations
A number of different abbreviations are used in the manual. These are explained in "Wire Color Code and Other Abbreviations".
G. Component location
The end of the manual contains a section that describes component appearance and location in the Vehicle Level Location components.
