volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Thermostatic Expansion Valve to Connector Block Line|Page 2702 > < Campaign 232 - Coolant Hose Leaking|Page 2697
Page 1
background image

Hose/Line HVAC: Service and Repair
Thermostatic Expansion Valve to Connector Block Line

Thermostatic Expansion Valve to Connector Block Line

Operation number: 87457-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Drain the refrigerant from the AC system.  Refer to: Refrigerant, draining See: Heating and Air Conditioning/Service and Repair/Refrigerant, Draining 
Lift aside the expansion tank.
Remove the upper engine stabilizer brace.  Refer to: Upper torque rod, B6304T2 See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts,
Brackets and Accessories/Engine Mount/Engine Torque Strut/Service and Repair/Upper Torque Rod 
Raise the servo reservoir. Refer to: Reservoir fluid power steering See: Steering and Suspension/Steering/Power Steering/Power Steering Fluid
Reservoir/Service and Repair 

1. Torque: Clips refrigerant pipe to bodywork, 6 Nm

2. Torque: M8, 24 Nm

Remove the panel.  Refer to: Secondary Bulkhead Panel RH See: Body and Frame/Firewall/Service and Repair 

1. Remove the plastic nuts.
2. Torque: M6, 10 Nm

Thermostatic Expansion Valve to Connector Block Line|Page 2702 > < Campaign 232 - Coolant Hose Leaking|Page 2697