XC70 AWD L6-3.2L VIN 98 B6324S (2009)
Communications Control Module: Programming and Relearning
Audio Module (AUD)
Downloading software and replacing the control module
General
New software can be downloaded into the audio module (AUD). When software is ordered the software and hardware of the vehicle are compared with
Volvo's central database. If the comparison corresponds then the software is downloaded into the control module.
If the comparison between the car and Volvo's central database does not correspond, then the database is updated with the vehicle's configuration. When
this is complete the software is downloaded.
Replacing control module
The control module is located under the right front seat.
After replacement of the audio module (AUD), the infotainment control module (ICM) checks its unique serial number. If the serial number is incorrect,
the audio module (AUD) will not work. If the problem remains after software download, try switching the ignition off/on.
Select the MOST network for a total download of software to the vehicle.
Integrated Audio Module (IAM)
Downloading software and replacing the control module
General
Software can be downloaded to the integrated audio module (IAM). When software is ordered, the vehicle' software and hardware is compared to
Volvo's central database. If they are compatible, the software is downloaded to the system.
If the comparison between the car and Volvo's central database does not correspond, the database is updated with the vehicle's configuration. When this
is complete, new software is downloaded.
Replacing the control module
The integrated audio module (IAM) is mounted in the center console. Upon replacement, the control module is removed from the center console.
After replacement of the integrated audio module (IAM), its unique serial number is checked by the infotainment control module (ICM). If the serial
number is incorrect, the integrated audio module (IAM) will not work. If the problem remains after software download, try switching the ignition off/on.
Select the MOST network for a total download of software to the vehicle.
Multimedia Module (MMM)
Downloading software and replacing the control module
General
Software is downloaded to the Multimedia module (MMM) via DVD.
When a DVD with map information is inserted, the software on the DVD is compared with that in the Multimedia module (MMM). If the software on the
DVD is more recent, a message is displayed in the High Level Display Front (HLDF) and the Multimedia module (MMM) software can be updated. The
update takes approximately 10 minutes and during this time the High Level Display Front (HLDF) will switch off.
Replacing the control module
The multimedia module (MMM) is mounted in the cargo compartment.
For V70/XC70/XC60 the control module is located on the left side, under the load floor.
Before the old control module is removed from the vehicle, the DVD with map information shall be removed from the control module. To configure the
new control module for the correct market the DVD with map information must be inserted in the Multimedia module (MMM), then the disc starts an
automatic configuration.
When replacing Multimedia module (MMM), a software download also has to be performed via the software manager in VIDA for the new serial
number to be entered in Central electronic module (CEM).
After start of the multimedia module (MMM), the infotainment control module (ICM) checks its unique serial number. If the serial number is incorrect,
the multimedia module (MMM) will not work. If the problem remains after software download, try switching the ignition off/on.
