volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 726 > < Reading and Clearing Diagnostic Trouble Codes|Page 724
Page 2
background image

Off = input signal for stop lamp not received.

Right turn signal lamp

Indicates if the trailer module (TRM) has activated the signal for the right-hand turn signal lamp.
On = right-hand turn signal lamp activated.
Off = right-hand turn signal lamp not activated.

Left turn signal lamp

Indicates if the trailer module (TRM) has activated the signal for the left-hand turn signal lamp.
On = left-hand turn signal lamp activated.
Off = left-hand turn signal lamp not activated.

Charging

Indicates if the trailer module (TRM) has activated the signal for charging (+12 V).
On = charging (+12 V) activated.
Off = charging (+12 V) not activated.

Parameters, value

Battery voltage, TRM

Indicates the value of the power supply to the trailer module (TRM).
Measurement range: 0 -25.5 V.

Description of Frozen Values, TRM

Description of frozen values

Explanation

Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored. Not all parameters can be read off for all diagnostic
trouble codes (DTCs). The parameter values can only be read off where they can provide more information about the prevailing circumstances when the
diagnostic trouble code (DTC) was stored.

Total mileage, value

Measurement range: 0-1,000,000 km
The value indicates the vehicle's total mileage when the Diagnostic Trouble Code (DTC) was generated.

MECU power supply, value

Measurement range: 0-63 V
Normal range: 12.0 - 14.5 V
The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.

Passenger compartment temperature, value

Measurement range: -40 to +215 °C
The value indicates the passenger compartment temperature when the diagnostic trouble code (DTC) was stored.

Outside temperature, value

Measurement range: -40 to +215 °C
The value indicates the outside temperature when the diagnostic trouble code (DTC) was stored.

Power supply position, status

The value indicates the current status of the power supply position when the diagnostic trouble code (DTC) was stored.
Key removed
Key recently removed
Key approved
Ignition off after Accessory position

Reading and Clearing Diagnostic Trouble Codes|Page 726 > < Reading and Clearing Diagnostic Trouble Codes|Page 724