XC70 AWD L6-3.2L VIN 98 B6324S (2009)
-
Remove the six screws.
-
Pull the glovebox out slightly and unplug the gray connector on the rear side.
-
Remove the glovebox.
-
Move the carpeting aside. Make a cut in the thick insulating mat starting level with the blue connector of the central electronic module (CEM) and
then continue straight down.
-
Move aside the insulating mat to access the grommet.
-
Remove the rear seat cushion by releasing the catches at the front edge (1) and then pulling forwards (2).
-
Disconnect any connectors.
