XC70 AWD L6-3.2L VIN 98 B6324S (2009)
-
Remove the central grille by detaching the catches on the inside and pressing the grille backwards.
The grille may be securely fastened. Use a rubber mallet and tap the grille with it at the locations of the hooks.
-
Take the new central grille and install the two sensors.
-
Press the grille into the bumper starting at the upper edge. Check that all hooks engage.
-
Connect the remaining connectors to the sensors.
Applies to cars with headlamp washing
-
Press the car's usual cable harness onto the grille.
-
Apply the yellow tape (1) of the cable harness to the middle of the grille. Secure the cable harness using three cable ties with clips.
Applies to cars with headlamp washing
-
Secure the cable harness with cable ties at the existing clips.
