XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Place the front grille with the front facing upwards on a table, as illustrated.
-
Place a weight on one end of the front grille so that it remains still.
-
Take the electrical cable from the kit.
-
Take a plastic weatherstrip tool or similar and insert it down into the fourth compartment in the left-hand side of the front grille, and turn the tool
carefully so that the plates in the front grilled are separated from each other. Turn so that the cable's connector can be inserted through the front
grille.
-
Carry out the same procedure with the cable's black joint section, but do not bend the plates more than the join section can pass between them as
this can damage the plates.
Image D applies to the V70, and S80 up to and including model year -2003 (CH -334999)
-
Install the front intake 50 mm (2") from the upper edge of the front grille, and tighten using the screw.
Applies to the S60, V70, and S80 up to and including model year -2003 (CH -334999)
-
Reinstall the front grille and clips at the upper edge on the front.
Steps 26-27 apply to the S80 from model year 2003- (CH 335000-)
-
Guide the front intake's cable in through the uppermost hole in row, next furthest to the left in the grille.
