XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Open the engine nipple.
Drain the coolant into a container.
Close the nipple.
Removing components
Remove:
-
the clamp between the oil pressure pipe and the oil return line at the turbocharger (TC)
-
the pipe screw that holds the oil pressure pipe to the connector on the cylinder block
-
the oil return line. Seal the opening in the cylinder block
-
the lower screw that holds the heat deflector plate over the turbocharger (TC)
-
the nuts for the front exhaust pipe connection to the turbocharger (TC). Lift off the exhaust pipe and tie it up. Seal the opening in the exhaust pipe
Note! The metal hose for the front exhaust pipe is easy to damage if it is twisted. Handle it with care to avoid leakage.
Depressurizing the fuel system
Lower the car.
Depressurize the fuel system acc. to: Fuel system pressure release See: Cylinder Head Assembly/Fuel Pressure Release/Service and Repair/Fuel System
Pressure Release.
Removing components
Remove
-
the engine stabilizer brace between the suspension turrets
-
the ground strips between the engine and the firewall
-
the heat deflector plate above the turbocharger (TC)
-
the plastic charge air pipe above the engine. Seal the openings
-
the cover over the nozzle pipes
-
the cover over the ignition coils
-
the upper engine coolant hose for the engine and radiator
-
the screw holding the dip stick pipe to the intake manifold
-
the brake vacuum hose from the intake manifold.
Undo the clamp holding the plastic charge air pipe to the electronic throttle module.
